Albixon ELEGANCE 70, Руководство пользователя

Страница: 29 / 84

4
17
18
20
26
21
22
2
28
27
19
15
14
11
3
2
1
23
25
8
16
12
10
List of ELEGANCE swim jet
components no. description
amount no. description amount
8.
Item Product Description Qty Product code
1 Pneumatic switch 1 pc PPD036
2 Pneumatic hose D5 7 m BXNDPPD003
3 Front screw 4 pcs BXNDPPD018
4 Swim jet front cover 1 pc BXNDPPD010
8 Nozzle regulating the water supply 1 pc BXNDPPD036
10 Nozzle screw - self-drilling 3 pcs
11 Nozzle fitting 1 pc BXNDPPD035
12 O-ring 1 pc BXNDPPD027
14 Pneumatic hose bushing 1 pc
15 Bushing O-ring 1 pc
16 Flange screws 16 pcs BXNDPPD044
17 Flange 1 pc BXNDPPD013
18 Sealing 2 pcs BXNDPPD028
19 Swim jet body screw – self-drilling 4 pcs BXNDPPD020
20 Swim jet body 1 pc BXNDPPD023
21 Air line hose 1 pc BXNDPPD004
22 Reduction 1 pc PVC0070
23 Non-return valve air intake 1 pc PPD0020
24 Swim jet pneumatic switch 1 pc *
25 Reduction 1 pc BXNDPPD015
26 Protective hose / Air intake hose 2 pcs PVC0050
27 Grommet into schaft 2 pcs ELM1129
28 PVC reduction 2 pcs 12
29 Reduction 1 pcs PVC057
PIC. 7
*) Elegance 70-230V = BXNDPPD001; Elegance 70-400V = BXNDPPD002; Elegance 80 = 1ND03-01-041; Elegance 95 = 1ND03-01-042;
24
29
10
/ Swim jet ELEGANCE 70
1
Motor
FM
- control fuse,
DM
- motor starter,
I.N.
- electro-pneumatic switch unit,
C
- contactor,
FI
- current protector
Electrical installation - WARNING
Only an authorized person with an appropriate qualification can perform the connection of the swim
jet motor switch in accordance with Decree no. 50/1978. The motor has to be protected against
overloading. The whole device can only be plugged in to the power supply protected by a circuit
breaker with a residual current of 0.03 A.
The tension of the electrical supply must correspond to the data on the tag installed on every device.
All metal parts of the device must be connected (earthed). Circuit breakers must comply with the
regulations that are valid for the motor to be protected under the expected operating conditions. All
instructions provided by the manufacturer must be respected (see marking on the label).
In the event of installation with a three-phase motor, connecting flanges in the terminal board must
be placed correctly between the coils of the motor (i.e. as a star). Input and output conductors from
the distribution box must be led through bushings preventing humidity and dirt from getting into the
distribution box. Conductors must have appropriate terminals for connection.
The electro-pneumatic switch must be installed in a dry place above the water level and at a distance
not exceeding further than 7 m from the pneumatic switch on the front of the swim jet. The pneumatic
hose (no. 2 pic. 3) is designed for connecting to the electro-pneumatic switch on the electro-
pneumatic switch (distribution board). It is very important to check if the hose is not kinked.
The electro-pneumatic panel consists of:
•
1 motor starter
•
1 electro-pneumatic switch
•
1 control fuse
All these components should be installed in the waterproof plastic box with the IP55 rate of protection.
9.
PIC. 8 PIC. 9
A
A
Swim jet ELEGANCE 70 /
11
ELEGANCE 70 / 80 / 95 |
27