13
FUNCTIONS AVAILABLE ACCORDING TO THE TYPE OF HOPPER (SINGLE- or MULTI-COIN) AND TO THE
TYPE OF PAY-OUT (COINS OR TOKENS or CHANGE RETURNED)
Single-coin hoppers, and menu set for COINS
Single-coin hoppers, and menu set for TOKENS
POS
Enable/disable option available,
POS not working even if set to
‘enabled’
POS
Enable/disable option available
Pay-out Table
Not available in the Menu
Pay-out Table
Available in the Menu only in Automatic Mode
Single-coin hoppers, and menu set for COINS + CHANGE RETURNED
POS
Enable/disable option available, POS not working even if set to ‘enabled’
Pay-out Table
Available in the Menu
Multi-coin hoppers
POS
Enable/disable option not available, POS not working
Pay-out Table
Not available in the Menu
5.2.4.1
N
OTE
V
ALIDATOR
S
ETUP
All the programmed note values get automatically enabled at the initial check. To modify this default condition, press
OK to get to the first option (ex. 5 €) and highlight it, then press UP or
DOWN to reverse its state
. Press OK to shift to the next opti
on (ex. 10 €).
5.2.4.2
C
OIN
S
ELECTOR
S
ETUP
The board automatically detects the presence of the coin selector during initial check. Among the accepted coins
(0.05-to-
2 €), the following ones get enabled by default: 0.50 €
-
1.00 €
-
2.00 €.
To modify this condition, press OK to get to the first option (ex. 2 €) and highlight it, then pres
s UP or DOWN to
reverse its state
. Press OK to shift to the next option (ex. 1 €).
5 < 10 > 20 50 100
OK OK OK OK OK
5 10 < 20 > 50 100
OK OK OK OK OK
Set up
Note validator
5 10 20 50 < 100>
OK OK OK OK OK
<5 > 10 20 50 100
OK OK OK OK OK
<5 > 10 20 50 100
NO OK OK OK OK
Set up
Coin acceptor
2,00
1,00
< 0,50 >
OK
NO
OK
OK
OK
< 1,00 >
0,50
2,00
OK
0,50
OK
< 2,00 > 1,00
OK
OK
0,50
OK
< 2,00 > 1,00
NO
OK
