Set up Hopper 1 :
2,00 €
5.2.4
SETTING
THE
PERIPHERAL
UNITS
This menu allows to set up the denominations accepted by the note validator and by the coin acceptor, as well as the
value of the coins/tokens dispensed. It also permits to set the change mode as either automatic or manual, and to
enable/disable the full/void sensors of the hoppers.
(*)
P
ERIPHERAL UNITS
SETUP
EMPTY OUT
HOPPERS
Set up
Cashless
Set up
Dispense mode
Set up
TOKEN + CHANGE
Set up
TOKENS
Set up
COINS
0,50
OK
OK
OK
< 2,00 > 1,00
OK
NO
1,00 < 0,50 >
2,00
OK
2,00 < 1,00>
0,50
NO
OK
OK
< 2,00 > 1,00
0,50
NO
OK
OK
Set up
Coin acceptor
Set up
GSM / GPRS
2,00
< 1,00 > 0,50
OK
OK
OK
< 5 > 10 20 50 100
NO OK OK OK OK
5 < 10 > 20 50 100
NO OK OK OK OK
< 5 > 10 20 50 100
OK OK OK OK OK
Set up
Note validator
Exit
5 10 < 20 > 50 100
OK OK OK OK OK
5 < 10 > 20 50 100
OK OK OK OK OK
Set up Hopper 2 :
1,00 €
Dispensing mode
MANUAL
(*)
Press OK, then Down
or Up to modify amounts
by steps of
0,05€ each,
then again OK to confirm
and move to Hopper 2
Level sensors
enabled
Enable / Disable
POS
Date / Time
-
>>>>>> Enabling POS will
make COINS option
unavailable!
(***)
Payout Settings
Enabled / Disabled
(**) Press
Down/Up to select Pay-out Table or to discard
it, then press OK to confirm. For Pay-out settings, go to
section 7.3.5.B
(***) Press Down/Up to choose POS type (Nayax, Payter,
Valina), then press OK to confirm.
(**)
(*)
Dispensing mode
AUTOMATIC
Enable ?
Yes
Select POS
Nayax / Valina / Payter
Level sensors
disabled
