background image

 

 

 
 
 
 
 
 

Safety Information 

 
 

• 

Except as explained in this manual, do not attempt to service Albércorp equipment yourself. Opening 
the equipment may expose you to dangerous voltages. Refer servicing beyond that described in this 
manual to authorized personnel. 

 

• 

Do not allow liquids or moisture to get into the equipment. If liquid does get into the equipment, 
unplug it immediately and contact your nearest authorized service center or Albércorp directly. 

 

• 

Ensure equipment is provided adequate ventilation. Do not block equipment ventilation openings. 

 

• 

Do not exceed equipment voltage or power ratings and capabilities. 

 

• 

Make sure that equipment is properly grounded. 

 

• 

Do not let unauthorized persons operate or service the equipment. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Information in this document is subject to change without notice. 
 
PSC-10A Single Cell Charger Instruction Manual, Book Revision 2.0, P/N 4200-017 

1997, 2001 Albércorp, 990 South Rogers Circle, Suite 11, Boca Raton, FL 33487. 

This manual may not be copied in whole or in part without express written permission from Albércorp. 
Printed in the United States of America. 
 

Содержание PSC-10A










Отзывы: