4
Attaching the control unit E25
Removing the control unit E25
• Push the control unit with the guide rail [2] into
the mount [3]
the connection cable [5]
coming from the interface.
• Slide the control unit into the position you want
and fix it in place by turning the clamping lever
[4].
• Now connect the connection cable [5] to the
control unit.
• Switch off the control unit.
• Remove the connection cable [5] from the
control unit.
• Loosen the locking lever [4] and pull the control
unit out of the mount [3].
without
Always switch off the control unit prior to attachment or removal! This prevents
your wheelchair from rolling away unintentionally, e.g. due to accidental contact
with the joystick.
!
Always ensure that the control unit does not fall onto the ground! If the control
unit is switched on and it falls to the ground, this could trigger an
unintentional travel impulse.
!
See the operating manual for the e-fix E35 regarding attachment and removal of the control unit E35
3
4
2
E 25
4
5
E 25
Instructions for use swivel arm e-fix
