Albatron PX915G4 PRO, Руководство пользователя

Страница: 39 / 54

PX915P4/ PX915G4 Series
IDE RAID Device
This item allows you to enable or disable the IDE RAID Device. Options: Enabled (default)
、
Disabled
Onboard I/O Chip Setup
Power On Function
This option allows you to select a way to power on your computer. Options: Password
、
Hot KEY
、
Mouse
Left
、
Mouse Right
、
Any KEY
、
BUTTON ONLY (default), and Keyboard 98
KB Power On Password
This it the password that your system will use as part of the power-on sequence. This field is only
configurable when “Power On Function” is set to “Password”.
Hot Key Power ON
This option allows you to use the Ctrl key along with a hot key (function key) to power on your system.
This field is only configurable when “Power On Function” is set to “Hot Key”.
Options: Ctrl-F1
、
Ctrl-F2…… Ctrl-F12
Onboard FDC Controller
Select “Enabled” if your system has a floppy disk controller (FDC) installed on the system board and you
wish to use it. If you install an add-in FDC or the system has no floppy drive, select “Disabled”. Options:
Enabled (default)
、 Disabled
Onboard Serial Port 1/ 2
Select an address and corresponding interrupt for the first/ second serial port.
Options: Disabled
、
3F8/IRQ4 (default for port1)
、
2F8/IRQ3
、
3E8/IRQ4
、
2E8/IRQ3
、
Auto
UART Mode Select
This item allows you to select the Infra Red (IR) standard to be used.
Options: Disabled (default)
、
ASKIR
、
IrDA
RxD, TxD Active
This item determines the RxD and TxD frequencies. This field only configurable if “UART Mode Select”
is set to “ASKIR” or “IrDA”. Options: Hi / Lo (default)
、
Hi / Hi
、
Lo / Hi
、
Lo / Lo
IR Transmission Delay
This item allows you to enable/disable IR transmission delay. This field only configurable if “UART Mode
Select” is set to “ASKIR” or “IrDA”. Options: Enabled (default)
、
Disabled
35