PX848PV Series
31
IDE Primary / Secondary /Master / Slave UDMA
Ultra DMA/100 functionality can be implemented if it is supported by the IDE hard drives in your
system. As well, your operating environment requires a DMA driver (Windows 95 OSR2 or a third
party IDE bus master driver). If your hard drive and your system software both support Ultra
DMA/100, select “Auto” to enable BIOS support. Options: Auto (default)
、
Disabled
Onboard Device
USB Controller
This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: Enabled (default)
、
Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default)
、
Disabled
USB Keyboard Support
Enables support for USB attached keyboards. Options: Disabled (default)
、
Enabled
AC97 Audio
This item allows you to control the onboard AC’97 audio. Options: Auto (default)
、
Disabled
Onboard LAN Control
This item allows you to enable or disable onboard LAN Controller.
Options: Enabled (default)
、
Disabled
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip. Options: Disabled (default)
、
Enabled
