PX848PV Series
26
Video BIOS Cacheable
Select “Enabled” to allow caching of the video BIOS which may improve performance. If any other
program writes to this memory area, a system error may result. Options: Enabled, Disabled (default)
Memory Hole at 15M-16M
When enabled, you can reserve an area of system memory for ISA adapter ROM. When this area is
reserved, it cannot be cached. Refer to the user documentation of the peripheral you are installing for
more information. Options: Disabled (default)
、
Enabled
Delay Prior to Thermal
Select the delay time before thermal activation from high temperatures.
Options: 4 Min
、
8 Min
、
16 Min (default)
、
32 Min
AGP Aperture Size (MB)
Select the size of the AGP (Accelerated Graphics Port) aperture. The aperture is a portion of the PCI
memory address range dedicated for graphics memory address space. Host cycles that hit the aperture
range are forwarded to the AGP without any translation.
Options: 4
、
8
、
16
、
32
、
64
、
128
、
256
PnP/PCI Configurations
Reset Configuration Data
Select “Enabled” to reset the Extended System Configuration Data (ESCD) if you have installed a
new add-on card and the system reconfiguration has caused such a serious conflict that the OS cannot
boot. Options: Disabled (default)
、
Enabled
Resources Controlled By
BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
Auto, you will not be able to manually assign IRQ DMA and memory base address fields, since
BIOS automatically assigns them. Options: Auto (ESCD) (default)
、
Manual
IRQ Resources
When resources are controlled manually, you can assign each system interrupt a type, depending on
the type of device using the interrupt. This is only configurable when “Resources Controlled By” is
set to “Manual”.
Options: IRQ-3/ 4/ 5/ 7/ 9/ 10/ 11/ 12/ 14/ 15
assigned to
PCI device
