PX845PEV/ GEV Series
45
HDD Power Down
When enabled, the hard disk drive will power down after a certain configurable period of
system inactivity. All other devices remain active.
Options: Disabled (default)
、
1 Min
、
2 Min
、
3 Min
、
4 Min
、
5 Min
、
6 Min
、
7 Min
、
8 Min
、
9 Min
、
10 Min
、
11 Min
、
12 Min
、
13 Min
、
14 Min
、
15Min
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
Options: Delay 4 Sec, Instant-Off (default).
Wake Up Control
If you highlight the “Wake Up Control” label and then press the enter key, it will display a
submenu with the following options:
PCI PME Wake Up
When you select “Enabled”, a PME signal from any PCI card will awaken the system.
Options: Disabled (default)
、
Enabled
RTC Wake Up
When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm
awakens the system from Suspend mode.
Options: Enabled
、
Disabled (default).
Date of Month Alarm
You can choose which date of the month the system will boot up. This field is only
configurable when “RTC Wake Up” is set to “Enabled”.
Time (hh: mm: ss) Alarm
You can choose the hour, minute and second the system will boot up. This field is only
configurable when “RTC Wake Up” is set to “Enabled”.
USB KB Wake-up From S3
This item allows you to awake the system from suspend mode by USB keyboard.
Options: Enabled
、
Disabled (default)
* When the ACPI Suspend Type is setting to S3, this function will be effective.
LAN Wake Up
This option allows you to awaken the system from suspend mode
To use this function, you need a LAN add-on card which supports power on functions. As
well as the wake-up on LAN jumper. Options: Disabled (default)
、
Enabled.
