PM800 Series
Boot Up Floppy Seek
When Enabled, the BIOS tests (seeks) floppy drives to determine whether they have 40 or 80 tracks.
Only 360-KB floppy drives have 40 tracks. Drives with 720KB, 1.2MB, and 1.44MB capacity all have 80
tracks. Because very few modern PCs have 40-track floppy drives, we recommend that you set this
field to “Disabled”. Options: Enabled
、
Disabled (default)
Advanced BIOS Features
Thermal Management
This item will monitor the CPU thermal to prevent the CPU damage with high temperature.
Virus Warning
This item allows you to choose the VIRUS warning feature for IDE Hard Disk boot sector protection. If
this function is enabled and someone attempts to write data into this area, BIOS will display a warning
message on the screen and sound an audio alarm (beep).
Options: Disabled
、
Enabled (default)
CPU L1 & L2 Cache
Make CPU internal cache active or inactive. System performance may degrade if you disable this item.
Options: Enabled (default)
、
Disable
CPU L3 Cache
Make CPU internal cache active or inactive. System performance may degrade if you disable this item.
This item can only display with the CPU that has L3 cache.
Options: Enabled (default)
、
Disable
Hyper-Threading Technology
This option allows you to enable/disable Hyper-Threading functionality. This item only applies when
the CPU installed supports Hyper-Threading Technology. Options: Enabled
、
Disabled (default)
CPU L2 Cache ECC Checking
Make CPU L2 cache ECC function active or inactive. Options: Disabled
、
Enabled (default)
Quick Power On Self Test
Allow the system to skip certain tests while booting. This will speed up the boot process.
Options: Enabled (default)
、
Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose “Enabled” to assign physical drive B to logical drive A and
vice-versa. Options: Disabled (default)
、
Enabled.
Boot Up NumLock Status
Selects the power on state for NumLock.
27
