PM800 Series
10
Hardware Installation
This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before
handling components. Electrostatic discharge may damage your system components.
CPU Processor Installation
This mainboard supports Intel
®
Pentium
®
4 processors using a Socket 478. Before building your system,
we suggest you visit the Intel website
http://www.intel.com
and review the processor installation
procedures.
CPU Socket 478 Configuration Steps:
1.
Locate the CPU socket on your mainboard and nudge the lever away from the socket. Then lift the
lever to a 90-degree angle.
2.
On the socket, locate the corner that has the pin-1 receptor. This corner will be near to the end of
the lever. Match the dot on the CPU with the pin-1 receptor on the socket and lower the CPU onto
the socket. The b
ith the face of the socket.
ottom of the CPU should be flush w
3
until it snaps back into position. This will lock down the CPU.
4
ear thermal g
and use the clasps on the
e power cable from the fan and insert it onto the
.
F
.
Lower the lever
.
Sm
rease on top of the CPU. Lower the CPU fan onto the CPU
fan to attach it to the socket. Finally, extend th
CPUFAN adapter
Pin1 Receptor
Dot
Attention: Before starting the system
Please recheck the installation procedures completely before
erly installed
starting the system. Verify that the heatsink is prop
and make sure the CPU fan is working. Overheating can
damage the CPU and other sensitive components.
