PM266A PRO/ PM266A
37
Run VGABIOS if S3 Resume
hen the system wakes up from the S3 resume function.
you highlight the “Wake Up Control” label and then press the enter key, it will display a submenu
fore power failure. Choose Former-Sts, to
store the system to the status before the power failure.
ormer-Sts.
re the PS2 keyboard Wake Up feature.
assword” Use this selection to force the user to enter a password after the system awakens
-S5” to
S3/S4/S5
HOT KEY”.
sable (default), Ctrl+F1(to F12), Power, Wake, Anykey.
Power Button Lock
ock
occurring at a VGA Port will awaken a system which had been
will awaken a
Select whether you want to run VGABIOS w
Options: Auto (default)
、
Yes
、
No
Wake Up Control
If
with the following options:
PWRON After PWR-Fail
This option determines whether you want to restart the system after a power failure. Select “On”, to
boot the system whether or not the system was on be
re
Options: Off (default)
、
On, F
PS2KB Wakeup Select
Use this option to configu
“P
from PS2 keyboard activity.
“Hot Key” Use PS2KB key to awake the system. See “PS2KB Wake Up from S3
configure the hotkey.
PS2KB Wake Up from
This option is used when “PS2KB Wake Up Select” is configured as “
Options: Di
This item allows you to l
the power button. Options: Enabled
、
Disabled (default)
VGA
When set to “On”, any event
previously powered down. Options: OFF (default)
、
On.
LPT & COM
When this option is set to On, any event occurring at a COM(serial)/LPT (printer) port
system which has been suspended. Options: LPT/COM (default)
、
COM
、
LPT
、
NONE
