PM266A PRO/ PM266A
29
P
P
When set to “YES”, BIOS will only initialize the PnP cards used for the boot sequence (VGA, IDE,
initialized by the PnP operating system like Windows
®
95. When
t
O
S
ystem Configuration Data (ESCD) if you have installed a
new add-on card and the system reconfiguration has caused such a serious conflict that the OS cannot
nabled
Resources Controlled By
the boot and Plug and Play compatible devices. If you choose
base address fields, since
、
Manual
ing on
This is only configurable when “Resources Controlled By” is
t to “Manual”.
assigned
to:
PCI
device
P
patible take the output from a VGA controller and
provide boot information and VGA compatibility.
O
mer (CLK)
PCI IRQ Assignment
This item allows you to select an IRQ address for your PCI slot 1-3.
nP/PCI Configurations
NP OS Installed
SCSI). The rest of the cards will be
set to “NO”, BIOS will initialize all the PnP cards. For non-PnP operating systems (DOS, Netware),
his option must be set to “NO”.
ptions: No (default)
、
Yes
Reset Configuration Data
elect “Enabled” to reset the Extended S
boot. Options: Disabled (default)
、
E
BIOS can automatically configure all
Auto, you will not be able to manually assign IRQ DMA and memory
BIOS automatically assigns them. Options: Auto <ESCD> (default)
IRQ Resources
When resources are controlled manuall
the type of device using the interrupt.
y, you can assign each system interrupt a type, depend
se
IRQ-3/4/5/7/9/10/11/12/14/15
CI / VGA Palette Snoop
Some graphic controllers that are not VGA com
map it to their display as a way to
ptions: Disabled (default)
、
Enabled
PCI Latency Ti
This item allows you to set up the PCI Latency Time (0-255). If you select the “32” it will optimize
PCI speeds. Options: 0-255
、
32 (default)
