Albatron PI960GLE, Руководство пользователя

Страница: 21 / 35

Mainboard PI960GLE
17
USB Power On function Header: JP3
USB devices attached to the back panel USB ports can awaken the system from sleep mode. In order to
enable this functionality, you must adjust the jumper cap on JP3 header for +5V or +5VSB mode
depending on which USB port that the USB device is attached to.
JP3 Assignment Assignment
1
Pin 1-2 Closed
+5V
USB Power On Disable (Default)
1
Pin 2-3 Closed
+5VSB USB Power On Enabled
Note: “Closed” means putting a jumper cap onto two adjacent header pins.
Clear CMOS Jumper: JP2
The “Clear CMOS” function is used when you are unable boot your system and need to reset the BIOS
settings (CMOS settings) back to the manufacturer’s original settings. This is also a way to reset the
system password if you have forgotten it.
JP2 Assignment
Pin 1-2 Closed
Normal (Default)
Pin 2-3 Closed
Clear CMOS Data
Note: “Closed” means putting a jumper cap onto two adjacent header pins.
1. Turn off your system and disconnect the AC power cable.
2. Set JP2 header to OFF (2-3 Closed).
3. Wait several seconds.
4. Set JP2 header to ON (1-2 closed).
5. Connect the AC power cable and turn on your system.
6. Reset your new password.
The following steps explain how to reset your CMOS
configurations when you forgot a system password.