Albatron PI960GLE, Руководство пользователя, Страница: 16 / 35

Mainboard PI960GLE
12
USB Ports/LAN Port: USB, USB LAN2
There are four onboard USB 2.0/ 1.1 ports on the back panel. These USB ports are used to attach with
USB devices, such as keyboard, mice and other USB supported devices. There are also one 10/100/1000
Mbps Ethernet LAN port available for you to attach internet cables.
Front Panel Headers: FPSW/LED, SPK1
FPSW/LED
Pin Assignment Function Pin Assignment Function
1
HDD LED (+)
2
Power LED (+)
3
HDD LED (-)
Hard Drive LED
(
HD_LED )
4
Power LED (-)
Power LED
(
ACPI_LED )
5
Reset Control (-)
6
Power Switch (+)
7
Reset Control (+)
Reset Switch
(
RST_SW )
8
Power Switch (-)
Power-on Switch
(
PWR_SW )
9
N/C
10 N/C
Power-on Switch Header: PWR_SW
This header can be attached to a power switch cable on your case front panel. You can turn your system
on or off by pressing the button attached to this power switch cable.
Hard Drive LED Header: HD_LED
If your case front panel has a hard drive LED cable, attach it to this header. The LED will flicker when
there is hard disk drive activity.
Power LED Header: ACPI_LED
These mainboards provide a 2-pin power LED header. If there is a 2-pin power LED cord on your case
front panel, you can attach it to the 2-pin power LED header. Then the power LED will illuminate while
the system is powered on.
Reset Switch Header: RST_SW
This header can be attached to a momentary SPST switch (reset button) cable on your case front panel.
The switch is normally left open. When the switch closed, it will cause the mainboard to reset and run
the POST (Power-On Self Test).