KX600S PRO/ KX600S
38
3. User Defined (default)
Allows you to set each mode individually.
When this option is enabled, the “suspend mode” time is configurable from 1 minute to 1 hour. The
HDD Power Down, which ranges from 1 min. to 15 min. and includes a “disable” option.
Note: If you select Min. or Max. Power Saving modes, the “HDD Power Down” value and the
“Suspend Mode” value are both fixed.
HDD Power Down
When enabled, the hard disk drive will power down after a certain configurable period of system
inactivity. All other devices remain active.
Options: Disabled (default)
、
1 Min
、
2 Min
、
3 Min
、
4 Min
、
5 Min
、
6 Min
、
7 Min
、
8 Min
、
9 Min
、
10 Min
、
11 Min
、
12 Min
、
13 Min
、
14 Min
、
15Min
Suspend Mode
This item allows you to select the period of inactivity before the system is suspended or put into
suspend mode.
Options: Disabled(default)
、
1Min
、
2Min
、
4Min
、
6Min
、
8Min
、
10Min
、
20Min
、
30Min
、
40Min
、
1Hour
Video Off Option
This field determines when to activate the video off feature for monitor power management.
Options: Suspend
→
Off (default), Always On.
Video Off Method
This option determines the manner in which the monitor goes blank.
Options:
V/H SYNC+Blank(default) This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Support Initial display power management signaling.
Modem Use IRQ
This determines the modem’s IRQ. Options: 3 (default)
、
4
、
5
、
7
、
9
、
10
、
11
、
NA.
This Manual: http://www.manuallib.com/file/2538033
