Mainboard KM51PV-754
24
RA
Row
1T/
F
R
T
S
P
P
**
M
S# to CAS# delay (Trcd)
This option allows to set the RAS# to CAS# delay to Rd/Wr command on the same bank.
Options: Auto, 2T, 3T, 4T, 5T, 6T, 7T.
precharge Time (Trp)
You can set the Row precharge time. Precharge to Active or Auto-Refresh of the same bank.
Options: Auto, 2T, 3T, 4T, 5T, 6T, 7T.
2T Memory Timing
Use this option to select the memory timing.
Options: 1T, 2T(Dault).
rame Buffer Size
This option allows you to set for pure DOS mode of using. You can set the amount of value to
share main memory.
Options: 32M, 64M (Default), 128M, Disable.
GB/TV Display
This option allows you to set for display shade mode of using.
Options: Auto (Default), RGB, TV.
V Mode Support
This option allows you to set the TV mode regarding your country formulated.
Options: NTSC-M, NTSC-J, PAL-M, PAL-BDGHI, PAL-NC, Disabled (Default).
ystem BIOS Cacheable
When enabled, accesses to system BIOS ROM addressed at F0000H-FFFFFH are cached,
provided that the cache controller is enabled.
Options: Enabled, Disabled (Default).
PnP/PCI Configurations
CI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA controller
and map it to their display as a way to provide boot information and VGA compatibility.
Options: Disabled (Default), Enabled.
CI Latency Timer (CLK)
This option allows you to set up the PCI Latency Time (0-255). If you select “32” it will optimize
PCI speeds.
Options: 0-255, 32 (Default).
PCI Express relative items**
aximum Payload Size
This item allows you to set the PCI-Express maximum payload size per time.
Options: 128, 256, 512, 1024, 2048, 4096(Default).
