Albatron KM333 PRO, Руководство пользователя

Страница: 34 / 52

KM333 Series
30
IRQ Resources
When resources are controlled manually, you can assign each system interrupt a type,
depending on the type of device using the interrupt. This is only configurable when
“Resources Controlled By” is set to “Manual”.
IRQ-3/4/5/7/9/10/11/12/14/15 assigned to: PCI device
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA
controller and map it to their display as a way to provide boot information and VGA
compatibility. Options: Disabled (default)
、
Enabled
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255). If you select the “32” it will
optimize PCI speeds. Options: 0-255
、
32 (default)
Frequency/Voltage Control
CPU Speed Detected
This item displays the CPU speed information detected by the system.
Spread Spectrum
The Spread Spectrum function can reduce the EMI (Electromagnetic Interference)
generated.
Options: Disabled
、
-1.50%
、
-1.00%
、
-0.70%
、
-0.50%
、
+/-0.75%
、
+/-0.50%
、
+/-0.35
、
+/-0.25%
CPU Host Frequency (MHz)
This item displays the CPU Host Clock. You can set it from xxx to 233. The default depends
on your CPU frequency. Default: By CPU speed
AGP/PCI Frequency (MHz)
This item displays the AGP/PCI Frequency.
DDR:CPU Ratio
This item allows you to adjust the DDR: CPU Clock Ratio. You can adjust this option to
match the DDR module you have installed.
If the CPU host frequency is 100
%
Options: By SPD (default)
、
2.00X
、
2.66X
、
3.33X
If the CPU host frequency is 133
%
Options: By SPD (default)
、
2.00X
、
2.50X
If the CPU host frequency is 166
%
Options: By SPD (default)
、
1.60X
、
2.00X
DDR Speed (strobe/sec)
This item displays the DDR Speed. (CPU Host frequency * DDR:CPU Ratio)