Albatron KM266 Series Скачать руководство пользователя страница 40

Страница: 40 / 63

System BIOS Cacheable

When enabled, accesses to system BIOS ROM addressed at

F0000H-FFFFFH are cached, provided that the cache controller

is enabled.

The Choices: Enabled, Disabled (default).

Video RAM Cacheable

Select Enabled allows caching of the video BIOS, resulting in

better system performance. However, if any program writes to

this memory area, a system error may result.

The Choices: Enabled, Disabled (default).

VGA Share Memory Size

This item allows you to share the DIMM memory size for VGA

memory.

The Choices: 32MB (default), 16MB, 8MB, Disabled.

PnP/PCI Configurations

PNP OS Installed

When set to YES, BIOS will only initialize the PnP cards used for

the boot sequence (VGA, IDE, SCSI). The rest of the cards will

be initialized by the PnP operating system like Window™ 95.

When set to NO, BIOS will initialize all the PnP cards. For non-

PnP operating systems (DOS, Netware™), this option must set

to NO.
The Choices: No (default), Yes.

Reset Configuration Data

Default is Disabled. Select Enabeld to reset Extrended System

Configuration Data (ESCD) when you exit Setup if you have

installed a new add-on and the system reconfiguration has

caused such a serious conflict that the OS cannot boot.

The Choices: Disabled (default), Enabled.

Resources Controlled By

BIOS can automatically configure all the boot and Plug and Play

compatible devices. If you choose Auto, you cannot select IRQ

DMA and memory base address fields, since BIOS automatically

assigns them.
The Choices: Auto <ESCD> (default), Manual.

Содержание KM266 Series
































































Результаты поиска

Содержание KM266 Series

Отзывы:

Похожие инструкции для KM266 Series

Бренды по названию

Популярные бренды

Albatron KM266 Series, Руководство пользователя

Результаты поиска

Содержание KM266 Series

Отзывы:

Похожие инструкции для KM266 Series

Бренды по названию

Популярные бренды