19
5.1 S/PDIF (Sony/Philips Digital Interface)
Connector: SPDIF
S/PDIF (Sony/Philips Digital Interface) is a newest audio transfer
file format, which provides impressive quality through optical
fiber and allows you to enjoy digital audio instead of analog
audio. Normally there are S/PDIF outputs as shown, one for RCA
connector and one for optical fiber connector, the most common
one used for consumer audio products. Through a specific audio
cable, you can connect the S/PDIF connector to other end of the
S/PDIF audio module, which bears S/PDIF digital output.
However, you must have a S/PDIF supported speaker and
decoder with S/PDIF digital input to connect to the S/PDIF
digital output to make the most out of this function.
SPDIF
Assignment
1
PWR
2
NC
3
SPD_OUT
4
GND
5
SPD_IN (only in KM266 PRO)
Super 5.1 Channel Audio Effect (only for
KM266 PRO)
This motherboard comes with an ALC650 Codec which supports
high quality of 5.1 Channel audio effect, bringing you a brand
new audio experience. On the strength of the innovative design
of ALC650, you’re able to use standard line-jacks for surround
audio output without connection any external module. To apply
this function, you have to install the audio driver in the bonus
Pack CD as well as an audio application supporting 5.1 Channel.
Picture below represents the standard location of all speakers in
5.1 Channel sound track. Please connect the plug of your front
speakers to the green “Speaker out” port, rear speakers’ plug to
the blue “Line in” port and both of the center and subwoofer
speakers to the red “MIC in” port.
For more details, please refer to CH 6.5.
