background image

 

Copyright 

All rights reserved. No part of this publication may be reproduced, 

transmitted, transcribed, stored in a retrieval system or translated into any 

language or computer language, in any form or by any means, electronic, 

mechanical, magnetic, optical, chemical, manual or otherwise, without the 
prior written permission of the company. Brands and product names are 

trademarks or registered trademarks of their respective companies. 

 

The vendor makes no representations or warranties with respect to the 

contents here have and specially disclaim any implied warranties of 

merchantability or fitness for any purpose. Further the vendor reserves the 
right to revise this publication and to make changes to the contents here 

have without obligation to notify any party beforehand. Duplication of this 

publication, in part or in whole, is not allowed without first obtaining the 

vendor’s approval in writing. 

 

Disclaimer 

We makes no warranty of any kind with regard to the content of this user’s 

manual and it is subject to be changed without notice and we will not be 

responsible for any mistakes found in this user’s manual. All the brand and 

product names are trademarks of their respective companies. 

 

FCC Compliance Statement 

This equipment has been tested and found to comply with the limits of a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the 

interference at his own expense. However, there is no guarantee that 

interference will not occur in a particular installation. 

 

 

Содержание KM266 Series
































































Отзывы: