Albatron K8Ultra-U Series, Руководство пользователя

Страница: 28 / 47

K8Ultra-U Series
24
MPS Version Control For OS
The 1.1 version is the older version that supports 8 more IRQs in the Windows NT
environment. Choose the new 1.4 version for Windows 2000 and Windows XP.
Options: 1.4 (default)
、
1.1
OS Select For DRAM > 64MB
Select “OS2” only if you are running the OS/2 operating system with greater than 64 MB of
RAM. Options: Non-OS2 (default)
、
OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to
attempt to predict the possible failure of storage drives. Options: Disabled (default)
、
Enabled
Advanced Chipset Features
DRAM Configuration
Max Memclock(MHz)
This item allows you to select the memory clock. When it set to “Auto”, the system will
automatically detected the memory clock. Options: Auto (default)
、
100
、
133
、
166
1T/2T Memory Timing
Use this item to select the memory timing that you installed. Options: Auto (default)
、
1T
、
2T
CAS# latency (Tcl)
This item determines CAS Latency. When synchronous DRAM is installed, the number of
clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from the
default value specified by the system designer. Options: Auto (default)
、
2.0
、
2.5
、
3
RAS# to CAS# delay (Trcd)
Select the DRAM delay time when being read.
Options: Auto (default)
、
2
、
3
、
4
、
5
、
6
、
7
Min RAS# active time (Tras)
This item allows you to select DRAM Active to precharge Delay.
Options: Auto
、
5
、
6
、
7
、
8
、
9
、
10
、
11
、
12
、
13
、
14
、
15
Row precharge Time (Trp)
You can set the time to precharge. Options: Auto
、
2
、
3
、
4
、
5
、
6
AGP Configuration
Fast Write
The AGP Fast Write technology allows the CPU to write directly to the graphics card
bypassing the system AGP 4X speed. Choose “Enable” only when you used with AGP card
support. Options: Disabled
、
Enabled(default)