Albatron K8Ultra-U Series, Руководство пользователя

Страница: 11 / 47

K8Ultra-U Series
7
Hardware Installation
This section will assist you in quickly installing your system hardware. Wear a wrist
ground strap before handling components. Electrostatic discharge may damage your
system components.
CPU Processor Installation
This mainboard supports AMD® Athlon
TM
64/ Sempron
TM
processors using a Socket 754.
Before building your system, we suggest you visit the AMD website and review the
Processor installation procedures. http://www.amd.com
CPU Socket 754 Configuration Steps:
1. Locate the CPU socket on your mainboard and nudge the locking lever away from the
socket. Then lift the lever to a 90-degree angle.
2. On the socket, locate the corner which has the “diagonally cut-corner” on the
rectangular shaped pattern of pinholes (see diagram below-left). Match that corner
with the “gold triangle” on the CPU (see diagram below-right) and lower the CPU onto
the socket. The bottom of the CPU should be flush with the face of the socket.
3. Lower the lever until it snaps back into position. This will lock down the CPU.
4. Smear thermal grease on top of the CPU. Lower the CPU fan onto the CPU and use the
clasps on the fan to attach it to the socket. Finally, extend the power cable from the
fan and insert it onto the “CPUFAN” adapter.
Attention: Overheating may damage the CPU and other
sensitive components. Please check the installation
completely before starting the system. Make sure the
heatsink and the CPU fan are properly installed.
Diagonally
Cut-corner
Gold triangle