Mainboard K8NF4X-AM2
13
Pin
Assignment
Pin
Assignment
1 VCC
2 VCC
3 -DATA
4 -DATA
5 +DATA
6 +DATA
7 GND
8 GND
USB2/3
9 Key
10
N/A
USB Power On function Header: JP4
USB devices attached to the back panel USB ports can awaken the system from sleep mode.
In order to enable this functionality, you must adjust the jumper caps on JP1 header for +5V or
+5VSB mode depending on which USB port that the USB device is attached to.
JP4
Assignment
Assignment
1
Pin 1-2 Closed
+5V
USB Power On Disable (Default)
1
Pin 2-3 Closed
+5VSB USB Power On Enabled
Note:
Close stands for putting a jumper cap onto two header pins.
Keyboard Power On function Header: JP1
USB devices attached to the back panel USB ports can awaken the system from sleep mode.
In order to enable this functionality, you must adjust the jumper caps on JP1 header for +5V or
+5VSB mode depending on which USB port that the USB device is attached to.
Attention
If you are using a USB 2.0 device with Windows 2000/XP, you will
need to install the USB 2.0 driver from the Microsoft
®
website. If you
are using Service pack 1 (or later) for Windows
®
XP, and using
Service pack4 (or later) for Windows® 2000, you will not have to install
the driver.
