Mainboard K8NF4X-AM2
11
SATA Connector: SATA 1/2/3/4
The four SATA connectors support 1.5 Gbps transmission speeds and RAID 0/ 1/ 0+1 mode.
One SATA connector only can attach one SATA HDD of each time using SATA cables.
Front Panel Headers: JW_FP, PWRLED, SPEAK
JW_FP
Pin
Assignment
Function
Pin
Assignment
Function
1
VCC5 (+)
2
VCC5 (+)
3 HDDLE
(-)
Hard Drive LED
(HDLED)
4 PWRLED
(-)
2-pin Power LED
(PWR LED)
5 GND
6 PWRBTN
7 RSTSW
8 GND
Power-on Button
(PWRBTN)
9 N/A
Reset Switch
(RESET)
10 Key
Pin
Assignment
Pin
Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
SATA1~4
7 Ground
This mainboard supports RAID 0/ 1/ 0+1 mode; refer
Appendix II
for
more information.
Attention
The FDD/ IDE cable is designed and should be attached with a
specific direction. One edge of the cable will usually in color such
as red, to indicate that should line up with the header pin-1.
