K8M800-754
14
The following procedures are for
im
resetting the BIOS password. It is
portant to follow these instructions closely.
Clear CMOS Setup: JBAT
The “Clear CMOS” function is used when you cannot boot your system due to some CMOS
problems, such as a password is forgotten. This jumper allows you to reset the CMOS configurations,
and then reconfigure it.
1.
1. Turn off your system and disconnect the
ble
2. Set JBAT to OFF (2-3 Closed)
3. Wait for several seconds
4. Set JBAT to ON (1-2 closed)
5. Connect the AC power cable
6. Reset a new password
AC power ca
and turn on your system
JBAT
3
JBAT
1
1 2
Closed
Normal function
(The wleans to put the jumper caps
3
on the hea pins.)
2 3
Closed
Clear CMOS
1
