K8M800-754
12
C
Floppy Drive Connector: FDC
he mainboard provides a standard floppy drive connector
360K, 720K, 1.2M,
44M and 2.88M floppy disks. This connector supports the floppy drive ribbon cables provided in
e packaging.
DE2
、
SATA1/ SATA2
B floppy disk, and so on. The mainboard also has two Serial ATA connectors that
and a Slave HDD. The configuration is similar to
50 MB/s and SATA RAID 0 or 1 mode. The
device of each.
onnectors
T
(FDC) that supports
1.
th
Hard Drive Connectors: IDE1/ I
The mainboard has a 32-bit enhanced PCI IDE Controller that supports Ultra ATA 33, Ultra ATA 66,
Ultra ATA 100 and Ultra ATA 133. It has two slots, IDE1 and IDE2 for connecting the hard drive
disks. You can expand to connect maximal 4 IDE supported devices, such as hard drive disk,
CD-ROM, 120M
support SATA RAID 0 or 1.
IDE1 (Primary IDE Connector)
You can connect up to two hard drive disks to IDE1. If you attach two HDDs, you must use a ribbon
cable with three connectors. You must also configure one drive as the master and one drive as the
slave.
IDE2 (Secondary IDE Connector)
The IDE2 connector can also support a Master
IDE1.
SATA1/ SATA2
The SATA connectors support the transfer rate to 1
connectors only can connect one serial ATA hard disk
This mainboard supports SATA RAID 0 or 1. See appendix
Il
for more information.
