7
Instructions for De – Activating Breakaway (Wireless)
1.
Press and hold the
Reset/Menu
button for 3 to 5 seconds.
2.
The display will read
LIMIT SETUP
. Press the
UP
ARROW
button until
the display reads
MODULE CONFIGURATION
.
3.
Press the
ENTER
button.
4.
Press the
UP
ARROW
button until the display reads
MOD Z…
5.
Press the
ENTER
button two times.
Note: there are two breakaway inputs, Breakaway I 1 and Breakaway I 2
I 1 should be left side and I 2 should be right side. Determine which one you
wish to disable.
6.
The display will read
Breakaway I 1
. Press the
UP
ARROW
button if you
want breakaway
I 2
. Press the
ENTER
button. The cursor will be flashing
underneath the word
Breakaway
. Press the
UP
ARROW
button to change
this to
Not Assigned.
Press
Enter
. The second line should read NO .
7.
Press the
ENTER
button Twice. The cursor will go away.
8.
Press the
RESET
button once to get back to the main menu.
9
.
Push the
RESET
button again to get the door ready to run. The display will
read
DOOR READY
and the cycle count.
Содержание R-BAC UltraSmart
Страница 1: ...UltraSmart ...
Страница 18: ...18 ...
