Albany 350016-0000, Руководство пользователя

Страница: 22 / 25

22 Nov. 2006
SRD2™ RESET SYSTEM
The Model 355 door comes standard with the SRD2™ self-repair device. The tensioning rope remains
attached to the bottom rail profile allowing it to swing away if struck. The tension on the rope will
automatically pull the bottom rail back into place. The Contactless Safety Edge™ does need to be reset,
however. To accomplish this, perform the following procedure:
1. Ensure the door opening is completely clear of any obstructions.
2.
Push and hold the blue SRD2 button on the face of the control panel. The door
will automatically close and re-latch the bottom rail with the Contactless Safety
Edge™ photocells. The door will also stop automatically when the bottom limit is
reached.
3.
Resume normal door operation.
4.
Figure 13 shows an improperly latched bottom beam, and Figure 14 shows a
properly latched bottom beam.
Figure 13
Figure 14