Albalá Ingenieros HVM0002C01, Руководство пользователя

Страница: 17 / 44

Albalá Ingenieros | Manual HVM0002C01
3.3. Attachment
The HVM0002C01 has four rubber feet for desktop operation. It also has threaded
fasteners to hold it in any position on any surface. These fasteners accept M4x0.7 screws
and penetrate 3mm into the device. Installation must be away from heat sources and
there should be no obstacles to airflow.
Position of the attachment points
3.4. Environmental considerations
This symbol indicates that this equipment must be deposited at a collection
point for proper waste treatment once it has reached the end of its useful
life.
3.5. Installation of SFP modules
The HVM0002C01 features receptacles to install optional SFP modules for signal
transmission or reception over optical fiber or other functions. To install or uninstall one
of these modules in the equipment, follow the instructions given below.
To install, insert the SFP module into the receptacle and slide it carefully until it clicks,
indicating that the module has reached its final position.
To uninstall, first remove any optical or electrical cables that are connected to the SFP
17