Albalá Ingenieros ASW3000C01, Руководство пользователя

Страница: 12 / 34

Albalá Ingenieros | Manual ASW3000C01
• The ASW3000C01 module and the mounting frame should always be
installed, maintained, operated and removed by personnel with sufficient
technical qualifications. The equipment should never be placed in damp
areas, near splashing liquid, or in explosive or corrosive atmospheres.
Neither modules nor mounting frames can be used in applications that
could endanger human life.
3.3. Environmental considerations
This symbol indicates that this equipment must be deposited at a collection
point for proper waste treatment once it has reached the end of its useful
life.
3.4. Power considerations
The UR3000 and UR3100 mounting frames can house as many ASW3000C01 modules
as will fit in them.
3.5. Installing the module in the mounting frame
The steps needed to install the ASW3000C01 module with the rear board in the
mounting frame are:
1 - Disconnect all power cords from the power supplies of the mounting frame.
2 - Install the ASW3000P02 rear board ensuring that its 12-pin connectors are properly
aligned with the mounting frame´s mating connectors. Check that the orientation of
the board is correct by looking at the placement of the text printed on it according to
the illustration below.
3 - Remove the blank panels covering the front and rear of the empty bays chosen for
installing the ASW3000C01 in the mounting frame.
4 - Attach the rear board to the mounting frame with two M3 metric screws and tighten.
5 - Insert the ASW3000P01 board (main board of the ASW3000C01 module) into the
front of the mounting frame. The edges of the card slide into two plastic guides inside
the mounting frame.
6 - Affix the main board to the mounting frame using the two screws included on the
front panel.
After these steps, the module is ready to be connected to other equipment.
12