Albalá Ingenieros AAD3014C01, Руководство пользователя

Страница: 14 / 28

Albalá Ingenieros | Manual AAD3014C01
3.6. Interconnection
The following figure shows the AAD3014C01 module rear board connector layout.
Rear view of the AAD3014C01
The AAD3014C01 module provides two analog audio inputs (IN-A, IN-B) and six outputs
(OUT1-A to OUT6-A, OUT1-B to OUT6-B) per section.
The distributor's balanced outputs are generated with two independent amplifiers - one
with a gain of +1 and the other with a gain of -1. If unbalanced operation is desired then
the number of outputs per channel is doubled (12 instead of six), however the maximum
output signal level cannot exceed 18dBm over 600Ω. Keep in mind that the output
marked with the negative (-) sign is 180
o
out of phase with the signal at the output
marked by a positive (+) sign.
The rear interconnection board is not designed to withstand mechanical stress. The
wiring must be fastened properly to the frame where the mounting frame is housed to
prevent the rear board from supporting the weight of the cables.
14