Albalá Ingenieros AAD3014C01, Руководство пользователя

Страница: 20 / 28

Albalá Ingenieros | Manual AAD3014C01
The following functions of the AAD3014C01 can be performed remotely:
- Signal level adjustment.
- Configuration of the signal absence and overload detectors.
- Supervision of the status of the error detectors.
4.3.1. Details of the AAD3014C01 registers
The AAD3014C01 module provides control and status registers that can be read and
written by means of specific commands described in the communication control
module user manuals.
The parameter information grouped in the CONTROL or RAM sections is stored in
volatile memory. Any modifications to the parameters will be lost when the module
power supply is disconnected unless the "EEPROM Save" button within the software
has been pressed.
The STATUS section parameters are read-only and cannot be modified.
The parameters that can be controlled and supervised remotely for each version of
the firmware are listed below:
VERSION 2.X
CONTROL
Name add ext msk snmp trap Description
MONO 0x00 0x01 Y N Allows summing R&L to make a monophonic channel
0=Disabled, 1=Enabled
SILENCE_MASK_R 0x01 0x01 N N Allows masking silence fail right channel
0=Disabled, 1=Enabled
OVERLD_MASK_L 0x01 0x02 N N Allows masking silence fail left channel
0=Disabled, 1=Enabled
OVERLD_MASK_R 0x01 0x04 N N Allows masking overload fail right channel
0=Disabled, 1=Enabled
SILENCE_MASK_L 0x01 0x08 N N Allows masking overload fail left channel
0=Disabled, 1=Enabled
GAIN_R 0x02 0xFF Y N Allows adjusting right channel gain
= x/2-96 dB
GAIN_L 0x03 0xFF Y N Allows adjusting left channel gain
= x/2-96 dB
OVL_THR_LEVEL 0x04 0xFF Y N Overload threshold level
= x/2 dBu (-128=<- ? dBu)
SIL_THR_LEVEL 0x05 0xFF Y N Silence threshold level
= x/2 dBu (-128=<- ? dBu)
NO_SIG_TOUT 0x06 0xFF Y N Silence timeout
= x s
STATUS
Name add ext msk snmp trap Description
SILENCE_R 0x01 0x01 Y Y Silence fail right channel
0=OK,1=Fail
SILENCE_L 0x01 0x02 Y Y Silence fail left channel
0=OK,1=Fail
OVERLOAD_R 0x01 0x04 Y Y Overload fail right channel
0=OK,1=Fail
OVERLOAD_L 0x01 0x08 Y Y Overload fail left channel
0=OK,1=Fail
20