background image

Albalá Ingenieros | Manual 

AAD2000C01

HUB/SWITCH

TL2000

COMMUNICATIONS

CONTROLLER MODULE

OTHER TL2000 

MODULES

Ethernet

Ethernet

Ethernet

Ethernet

REMOTE CONTROL UNIT

TLE2001

PSU2000

PSU2000

TLE2001

PSU2000

PSU2000

UR2000 INTERNAL BUS

UR2000 INTERNAL BUS

Module remote control and supervision

4.3. Module remote control and supervision

The AAD2000C01 can optionally be remotely controlled/supervised.

In order to perform remote configuration and supervision of the module  an optional
TL2000 family remote communications controller must be installed in the mounting
frame.

The main function of the communications control module is to interface  between a
10/100 Ethernet port and the internal bus of the mounting frame. The following
illustration shows the most common control situations: from a computer or control
panel via Ethernet.

Certain communications control modules provide additional, more advanced functions
such as an SNMP agent, logging of status changes of the modules and a Web interface
for remote control, etc.

Software for simple configuration and supervision with a GUI for multiple modules can
be downloaded from the Albalá Ingenieros website.

18

Содержание AAD2000C01



























Отзывы: