Arctic Oven 10 X 20 Instructions www.alaskatent.com
November 5, 2003 Page 6 of 9
13. Lift the fly to expose a spring snap sewn to a gray
patch. Also, sewn to the tent body, find a D-ring sewn
to a gray patch. Connect the spring snap through the
D-ring. Connect all remaining spring snaps and D-ring
assemblies.
14. Finally, nest the vent tubes. One vent tube is
located on each side of the tent body and fly. From
outside the tent, reach through the fly’s vent tube and
gently pull the tent body vent tube until they are
aligned. Vent tubes should remain open at all time
Congratulations
, you have successfully erected the
Arctic Oven 10x20 – the world’s finest all-season
tent.
