Assembly directions for the North Star 10,000 light box.
continued
5) With your right hand raise the other end of the bulb
to about a foot above the reflector to help in this
alignment.
6) With your left
hand fingers pull
the bulb back
and upward into
the bulb holder,
(the base will
flex).
7) Let the bulb pivot
in the fingers of
your left hand as
bulb lowers into
its plastic bulb
holder on the reflector.
8a) Install top half of the clear plastic bulb holder (these
are taped to the light bulb shipping cartons) by
pushing it over the light bulb and into the clear
plastic bottom half. Connect one leg of top clip
(farthest away from you) onto lower clip first.
8b) Place index finger under bottom clip for support
and with thumb gently squeeze top clip down onto
and over side tab of lower clip until it snaps into
place and locks onto lower clip.
9) Slide the diffuser cover back in place, rough side out.
Replace the white metal end strip over diffuser cover
and reinstall the screws.
10) Plug unit into a 120-volt outlet.
11) Turn unit on by depressing red button on top of
unit.
12 in.
5
6
8b
8a
7
IMPORTANT: MAKE SURE THE BULB IS LOCKED INTO PLACE IN THE BULB HOLDER.
S
N
AP
(800) 880-6953 www.alaskanorthernlights.com
Tab
