Alarm Lock Trilogy DK3000 Series, Инструкция по программированию

Страница: 37 / 40

37
•
GROUP 1 ENABLES GROUP 4 USERS = A Group 1 USER CODE
entry during a predefined schedule will allow access to Group 4
Users.
•
GROUP 1 PUTS UNIT IN PASSAGE = A Group 1 USER CODE
entry during a pre-defined schedule will unlock unit.
INSTALLER = See.... CODE, INSTALLER CODE.
KEYPAD = 10-numeric keys,
:
and special
;
key.
•
KEYPAD LOCKOUT = Keypad is programmed to lockout Users, for
a specified period of time, when a specified number of invalid User
Codes are entered.
•
KEYPAD PROGRAMMING = Ability to program the lock through the
keypad.
KEYPRESS = Pressing a button on the Lock’s Keypad.
LEVEL ABILITY = Predefined User Types (such as Master, Installer,
Manager, Supervisor, and Print Only User) have specific abilities
to program and/or control the lock.
LOCKOUT ATTEMPTS = A specified number of invalid User Code
entries (1-9), that will disable the keypad for a predefined period of
time (1-60 seconds).
LOCKOUT TIME = A predefined time (1-60) seconds that the lock will
stop accepting User Codes, after a specified number of invalid
User Code entries (1-9).
LOG = See... AUDIT TRAIL.
MANAGER = See... CODE, MANAGER CODE.
MASTER = See... CODE, MASTER CODE.
PASSAGE = Allow anyone to pass through the door without USER
CODES (door is unlocked).
PRINTER = A printout device such as an infrared printer or computer
printer.
PROGRAM MODE = A mode allowing program/data to be entered
through the keypad. Only specific Users can program a lock
manually, by entering their USER CODE, followed by the [
;
]
key. To exit program mode, hold any key until repeated beeps are
heard.
PROGRAMMABLE RELAY FUNCTIONS
= The relay can be
programmed for one or more functions.
RELAY = Switched output allowing remote control of other devices.
For an explanation of all relay features, see Function 67 on page
26.
REMOTE INPUT = Entry into a restricted area, by pressing a button
connected to the REMOTE INPUT WIRES (White and White) by
someone on the other side of the door.
SCHEDULE = A programmed operation (enable/disable, lock/unlock,
etc.) on a specific day (Sunday through Saturday) and time.
SCHEDULES, QUICK = Any one of four most common types of
schedules can be programmed.
TIME = Hours and Minutes in the HHMM format.
TIME/DATE STAMP = A recorded date and time that an event
occurred.
TIMEOUT = Immediate operation for a specified number of hours.
UPLOAD
= Receive data from the lock or AL-DTM.
USER
= A person who has been provided with a USER CODE for
access through the door.
USER LOCKOUT, TOTAL = All Users (except for Master Code) have
been locked out.
Glossary (cont'd)