32
Groups and Scheduled Group 1 Examples
(cont'd.)
Functions 90/91
:
Use Function 90 and 91 (see page 29) to create a window of time where if any Group 1 User Code is entered within the
programmed window, a
relay
will be activated for 2 seconds. The relay can be configured to disarm a burglary control panel. See page 29.
1. Enter Program Mode (if not in already).
2. Connect relay to a burglar control panel with switch input for disarming.
3. Using Function 2, create User 4 with a User Code of "456789":
Press
;
2
;
4
;
4
5
6
7
8
9
:
.
4. Because User 4 does not have a default Group association, make User 4 a member of Group 1 using Function 35:
Press
;
3
5
;
4
;
1
:
.
5. Use Function 90 to set the time to open the window (8:30 A.M. all days of the week) allowing any Group 1 member to close the relay for 2
seconds.
Note:
Only 1 relay closure will occur even if another member of Group 1 enters their User Code. Use Function 91 to set the
time to close the window (10 A.M. for all days of the week):
Function 90
(Open Window Time) = 8:30 A.M.: Press
;
9
0
;
0
;
0
8
3
0
:
Function 91
(Close Window Time) = 10:00 A.M.: Press
;
9
1
;
0
;
1
0
0
0
:
6. Exit Program Mode (hold down any key for 3 seconds).
The relay will close, one time only, when a member of Group 1 enters their User Code between 8:30AM and 10:00AM. If a Group 1 User
does not enter their User Code during the specified window, Functions 90/91 remain inactive
•
The alarm panel will have to be armed at night by the User or by an automatic schedule function of the alarm panel.
Functions 92/93
:
Use Function 92 and 93 (see page 30) to create a window of time where if any Group 1 User Code is entered within the
programmed window,
Group 4 Users
will be enabled.
1. Enter Program Mode (if not in already).
2. Using Function 2, create User 4 with a User Code of "456789":
Press
;
2
;
4
;
4
5
6
7
8
9
:
.
3. Because User 4 does not have a default Group association, make User 4 a member of Group 1 using Function 35:
Press
;
3
5
;
4
;
1
:
.
4. Using Function 17, disable Group 4. (Group 4 will need to be "disabled" before it can be "enabled" later).
Press
;
1
7
:
.
5. Use Function 92 to set the time to open the window (8:30 A.M. all days of the week) allowing any Group 1 member to enable Group 4. Use
Function 93 to set the time to close the window (10:00 A.M. all days of the week).
Function 92
(Open Window Time) = 8:30 A.M.: Press
;
9
2
;
0
;
0
8
3
0
:
Function 93
(Close Window Time) = 10:00 A.M.: Press
;
9
3
;
0
;
1
0
0
0
:
6. Exit Program Mode (hold down any key for 3 seconds).
The lock will now enable Group 4 User Codes if User 4 (or any Group 1 member) enters their User Code between 8:30 A.M. and 10 A.M.
If no Group 1 member arrives to enter their User Code between 8:30 A.M. and 10 A.M., Group 4 User Codes will not be enabled and will
remain disabled all day.
•
The device will have to be manually locked each night by entering the following command using Function 82:
;
4
6
:
•
The device can also be programmed to automatically disable Group 4 members each night at 5 P.M. by using Function 82:
;
8
2
;
0
;
1
7
0
0
:
•
Test the device by creating User 222 (with User Code 466466) and adding User 222 to Group 4:
;
2
;
2
2
2
;
4
6
6
4
6
6
:
;
3
5
;
2
2
2
;
4
:
•
Remember to exit Function Mode when programming is complete.
Содержание Trilogy DK3000 Series
Страница 38: ...38 NOTES ...
Страница 39: ...39 NOTES ...
