Alarm.Com ADC-SWV100, Руководство пользователя

Страница: 3 / 7

3
In the box
Additional parts requirements
Installation of the Smart Water Valve requires additional fittings to connect the ends of the valve to
the pipe. The type of fittings needed will depend on the pipe material, industry standards, and
applicable plumbing codes. Please see the “Specifications” section of the product packaging for more
information on the pipe size and thread type of your specific Smart Water Valve.
2 3
Buttons
❶
Networking
Places the device into learn mode. This button is
also used to factory reset the device.
See “Resetting the Smart Water Valve to factory
default settings.”
❷
Open: Opens the valve
❸
Close: Closes the valve
LEDs
❹
Network
°
On: Added to a Z-Wave network
°
Blinking: In learn mode
°
Off: Not added to a Z-Wave network
❺
Valve open
°
On: Open
°
Blinking: Opening
°
Off: Closing or closed
❻
Valve closed
°
On: Closed
°
Blinking: Closing
°
Off: Opening or open
If all LEDs are off, the device has no power.
All LEDs will flash for five seconds during
a factory reset.
Smart Water Valve control unit Actuator Power adapter
Wall bracket Valve Cable ties (x3) Wall anchors & screws (x2)
❶
❹
❺
❻
❸
❷