Alaris 800TIG2CZD1 Скачать руководство пользователя страница 28

Страница: 28 / 42

BDDF00144 Issue 1

27/40

Alaris™ GW 800 Volumetric Pumps

Compatible Infusion Sets

The Pump uses standard, single-use, disposable Infusion sets with Luer-lock connectors . The user is responsible for verifying the

suitability of a product used, if it is not recommended by BD .

• BD recommends the use of infusion sets with anti-siphon valves whenever possible. The anti-siphon valve

prevents free flow from occurring if an infusion set is incorrectly loaded or removed from the Pump.

• New sets are continuously being developed for our customers. Please contact your local BD representative for

availability.

• It is recommended that Infusion sets are changed in accordance with the Directions for Use. Carefully read the

Directions For Use supplied with the Infusion set prior to use.

Please note these drawings are not to scale

Standard Sets

273-001V

Infusion set with 15µm filter in drip chamber, anti-siphon valve . (230 cm)

273-002V

Infusion set with 15µm filter in drip chamber, 1 Y site and anti-siphon valve . (240 cm)

273-003V

Infusion set with 15µm filter in drip chamber, 2 Y sites, back check valve and anti-siphon valve . (240 cm)

273-004V

Infusion set with 15µm filter in drip chamber, roller clamp and Luer back check valve . (220 cm) Suitable for gravity

infusion .

273-005V

Infusion set with roller clamp and a back check valve . (220 cm) Suitable for gravity infusion .

273-303EV

Infusion set with 15µm filter in drip chamber, two back check valves and two SmartSite Valve Y Port . (295 cm)

273-304V

Infusion set with 15µm filter in drip chamber . (270 cm) Suitable for gravity infusion .

Blood Sets

273-007V

Blood set with 1 upper Y site, in-line drip chamber with 200µm filter, and Luer back check valve . (290 cm) Suitable

for gravity infusion .

273-008EV

Blood set with 1 upper and 1 lower SmartSite Valve Y port, back check valve, in-line drip chamber with 200µm

filter and Luer back check valve . (300 cm) Suitable for gravity infusion .

273-080EV

Blood set with 2 spikes, 1 upper and 1 lower SmartSite Valve Y port with anti-siphon valve and in-line drip

chamber with 200µm filter . (255 cm)

Содержание 800TIG2CZD1











































Результаты поиска

Содержание 800TIG2CZD1

Отзывы:

Похожие инструкции для 800TIG2CZD1

Бренды по названию

Популярные бренды

Alaris 800TIG2CZD1, Инструкция по применению

Результаты поиска

Содержание 800TIG2CZD1

Отзывы:

Похожие инструкции для 800TIG2CZD1

Бренды по названию

Популярные бренды