Alamo UNDER THE GUARDRAIL Скачать руководство пользователя страница 6

Страница: 6 / 92

Alamo Group

Company

Please fold (do not tear), tape, and drop in any mailbox.

BUSINESS REPLY MAIL

FIRST CLASS MAIL PERMIT NO. 80 SEGUIN, TX

POSTAGE WILL BE PAID BY ADDRESSEE

ALAMO INDUSTRIAL

1502 E. Walnut St.

SEGUIN TX 78156-9967

Please fold (do not tear), tape, and drop in any mailbox.

NO POSTAGE

NECESSARY

IF MAILED

IN THE

UNITED STATES

PLEASE FILL OUT OWNER WARRANTY REGISTRATION INFORMATION

SIGN, AND DROP LAST COPY IN ANY MAILBOX.

IMPORTANT!

TO PLACE THIS WARRANTY IN EFFECT,

THIS WARRANTY REGISTRATION MUST BE

FILLED OUT, SIGNED, AND MAILED WITHIN 30

DAYS OF DELIVERY DATE OF THIS MACHINE.

DEALER AND PURCHASER MUST SIGN.

ATTENTION: ANY CLAIM SUBMITTED TO ALAMO INDUSTRIAL

WILL BE REFUSED UNTIL COMPLETED, SIGNED

WARRANTY REGISTRATION CARD IS ON FILE.

TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR •

TEAR • TEAR • TEAR • TEAR • TEAR • TEAR • TEAR

Содержание UNDER THE GUARDRAIL





























































































Результаты поиска

Содержание UNDER THE GUARDRAIL

Отзывы:

Бренды по названию

Популярные бренды

Alamo UNDER THE GUARDRAIL, Руководство оператора

Результаты поиска

Содержание UNDER THE GUARDRAIL

Отзывы:

Бренды по названию

Популярные бренды