manualshive.com logo in svg

Alamo UNDER THE GUARDRAIL, Руководство оператора

Поделиться
Скачать
Alamo UNDER THE GUARDRAIL Скачать руководство пользователя страница 49

OPERATION

Operation Section 4-8

OPERA

TION

© 2003 Alamo Group Inc.

UGM  06/03

5.  PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the mower and tractor must be performed.  This
includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped and
functional, and performing needed repairs.  Do not operate the mower and tractor if the pre-operation inspection
reveals any condition affecting safe operation.  Perform repairs and replacement of damaged and missing parts as
soon as noticed.  By performing a thorough pre-operation inspection and service, valuable down time and repair
cost can be avoided.

DANGER!

Always turn motor control switch to “OFF” before performing service on the Mower.
Never work on the Mower with the motor control switch in the “ON” postions. Blades
or Drivelines could turn without warning and cause immediate entanglement, injury
or death.

 

(SRM-3)

WARNING!

Periodically inspect all moving parts for wear and replace when neces-
sary with authorized service parts.  Look for loose fasteners, worn or
broken parts, and leaking or loose fittings.  Make sure all pins have cotter
pins and washers.  Serious injury may occur from not maintaining this
Implement in good working order.

 

(SG-21)

Never work under the Mower, the framework, or any lifted component
unless the Mower  is securely supported or blocked up to prevent
sudden or inadvertent falling which could cause serious injury or
even death

. 

   (SG-14)

WARNING!

Содержание UNDER THE GUARDRAIL





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды