manualshive.com logo in svg

Alamo UNDER THE GUARDRAIL, Руководство оператора

Поделиться
Скачать
Alamo UNDER THE GUARDRAIL Скачать руководство пользователя страница 45

OPERATION

Operation Section 4-4

OPERA

TION

© 2003 Alamo Group Inc.

UGM  06/03

1.  OPERATOR REQUIREMENTS

Safe operation of the mower is the responsibility of a qualified operator.  A qualified operator has read and understands
both the mower and tractor Operator Manuals and is experienced in tractor and mower operations and all associated
safety practices.  In addition to the safety messages contained in this manual, safety message decals are affixed
to the mower and tractor.  If any part of the operation and safe use of the mower and tractor is not completely
understood, consult an authorized dealer for a full explanation.

Safe mower operation requires that the operator wear approved Personal Protective Equipment (PPE) for the job
conditions while connecting, operating, servicing and repairing the mower and tractor.  PPE is designed to provide
operator protection from bodily injury and includes the following:

NEVER use drugs or alcohol immediately before or while operating
the Tractor and Implement. Drugs and alcohol will affect an
operator’s alertness and coordination and therefore affect the
operator’s ability to operate the Equipment safely.   Before
operating the Tractor or Implement, an operator on prescription
or over-the-counter medication must consult a medical
professional regarding any side effects of the medication that
would hinder their ability to operate the Equipment safely.
NEVER knowingly allow anyone to operate this Equipment when
their alertness or coordination is impaired. Serious injury or
death to the operator or others could result if the operator is
under the influence of drugs or alcohol. 

 

(SG-27)

DANGER!

Personal Protective Equipment (PPE)

"

Protective eye glasses, goggles, or face shield

"

Hard hat

"

Steel toed safety footwear

"

Gloves

"

Hearing protection

"

Close fitting clothing

"

Respirator or filter mask

Содержание UNDER THE GUARDRAIL





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды