ALADIN ALADIN PRIME, Руководство по эксплуатации, Страница: 31 / 48

English
31
TEC Diving with microbubble level (MB)
V UWATEC ® Aladin ® dive computers
V
2 Terminology
This chapter will exclusively deal with terminology and display features used while diving with MB levels.
All other features are described in chapter III (->15).
2.1 Display during microbubble (MB) no-stop phase
(Max. depth >) Temperature
> MB level active
> No-stop time relative to L0
> Temperature and time of day
> (Max. depth)…
16 min Dive time MB no-stop time 9min
Current depth
Maximum depth
35.7m
Level stop phase MB no-stop phase
Dive phase during which surfacing is
possible without MB level stop.
Time
Depth
MB level
activated
Level L2
is active
Nitrogen
loading bar
relative to LO
->24
MB no-stop time
Remaining time at a
respective depth allowing
ascent without level stop.
NO
CNS O
2
%
2 x
DEPTH
NO ST NO STOP OP
DIVE TIME
2.2 Display during level stop phase
(Max. depth >) Temperature
> MB level active
> No-stop time or deco information relative to L0
> Temperature and time of day
> (Max. depth)…
Lowest level
stop depth
Total ascent time (14 min)
3 min
Level stop duration
MB no-stop phase
Time
Depth
Level stop duration
The duration of a level stop
at a given level stop depth
is displayed.
Level stop
depth
The deepest level
stop is displayed.
Total ascent time
including level stops
Level stop phase
To complete the dive without being
reduced to a lower MB level all requested
level stops must be observed.
35.7m
9m/30ft
6m/20ft
3m/10ft
STOP STOP
S
L
O
W
CNS O
2
%
DEPTH DEPTH DIVE TIME DIVE TIME
Nitrogen
loading bar
relative to LO
->24
Whereas the quantitative information relative to L0 can be seen by pressing the right button,
qualitative information is always visible on the display in form of the nitrogen loading bar. In par-
ticular, when the L0 no-stop time is less than three minutes, the nitrogen bar will flash ->24. This
will help you avoid entering inadvertently into decompression.