Akytec MV210-221, Руководство пользователя

Страница: 18 / 41

4 Connection
17
akytec GmbH - Vahrenwalder Str. 269 A - 30179 Hannover - Germany Tel.: +49 (0) 511 16 59 672–0 - www.akytec.de
FU1 – FU9 - 1.0 A / 600 V fuses
Fig. 4.6 Connection diagram of three-phase circuits
CAUTION
For correct operation of the device, it is necessary to correctly connect the input circuits to the
Device, as shown in
Figure 4.6 .
To configure a group of inputs into the three-phase connection mode, do one of the following actions:
– enable the corresponding mode in akYtec Tool Pro;
– write the value
1 to the corresponding Modbus register.
4.6 Ethernet connection
To connect modules to an Ethernet network, you can use the following schemes:
– Wye (
Figure 4.7 ),
– Daisy-chain ( Figure 4.8 ).