AKYAPAK ASM, Руководство пользователя

Страница: 28 / 38

ASM
USER’S MANUEL
PAGE: 28
03.04-B1
10. MAINTENANCE
To take the high performance from our machine,must be cleaning and doing the regular
maintenance.
The maintenance operation we can add in two groups.
1- Protaction of the maintenance.
2- Maintenance and repairing after the machine damage.
10.1.PROTACTION OF THE MAINTENANCE
The protaction of the maintenance;the losses determined in the machine,before the damage,the
dispositions taken in this situations are below.
- Regular control of the lubrication
-Regular cleaning
- The cleanness of the bending material.
- Controling the machine parts with amortization.
- The risk of the loosing the screw parts due to vibration working.
10.2. REGULAR CLEANLINESS
In the bending operation on the rolls can stick the dirty and rust parts.The rolls shaft after the
bending operation must clean and their surfaces are controling.Don’t bend the hard materials
on the machine,if only the rolls are hardened.The machine working atmosphere,must not
effective ,from the atmosphere conditions,and must be witout the dust.Especially must to pay
attention for the lift screw at the bottom and side rolls shaft.This lift screw must control every
day by run an eye over,lubricate and clean their surface from the strange parts.
10.3. CHECKING THE ABRASION PARTS IN THE MACHINE
If the operator and the person responsible for the maintenence parts,at the working
operation,hear the voice inside the machine ,must stop the machine and control the looses
parts.If you don’t want to abrasion the parts inside the machine,do the right time control and
lubricate the machine .
10.4. REPAIRING THE FAILURE
At the damage situations and maintenance, the machine cover must be closed and the energy is
cutting.The machine repairment must be doing from the side autorized personal.,and the
assembly drawing carefully to investigate.
ATTENTION !!!!!
For all the maintanence and repairments the machine cover will be
closed and the energy must be cutting.