AKYAPAK ASM, Руководство пользователя

Страница: 12 / 38

ASM
USER’S MANUEL
PAGE: 12
03.04-B1
6.11. SAFETY FACTORS AT THE MACHINE ASSEMBLY.
Akyapak sylinder bending machine ,must be placed on the hard and strong ground.(See the
assembly plan)
DANGEROUS LIFE
!
The working place of the machine must be clean ,every time.
6.12 IMMEDIATE SITUATION TO DO
At the immediate situation press the emergensy button to stop the machine.
6.13 WARNING SAFETY FACTORS
The machine can use only from the authorized personal. The machine can use only at the closed places. The
machine mus be held far-off ,from the burning and explosive material. When the operator is living his
place,the switch from ON position must remove to OFF position. The producer is not responsible for the
damage at the equipments and parts,changing on the machine.
7. PROTACTION FACTORS
The protection factors,for the operator working at the machine,are warning equipments,attached
below in 7.1 Chapter-check list .This protaction factors,are separate attached for USER.
CONTROL THE PROTACTION FACTORS
9
Before every work in relays, control the protaction factors.
9
Once at the week periodicaly ,control the safety elements.
9
After all the repairments, control the protaction factors.
TO MAKE THE CONTROL,BE CAREFULE FOR THE FOLLOWING SUBJECTS
9
Are the fixed position is right or not.
9
Reliable or not .
9
The function are right or not.
9
The assembly are right reliable or not.
Before working if the machine have problem or mistake, satisfy the problem.
In the working time if you see the problem,try to satisfy them.Before and at the working time
don’t pull out the safety elements,and don’t leave the circuit.