Akva AKVAconnect 4.1, Руководство пользователя

Страница: 13 / 35

Click on «HW Connections».
To add a new sensor or winch:
1. Click on «Add sensor» or «Add winch».
2. Then select the type of sensor or winch from the drop down list shown in type.
3. In configuration, select the ADIO2 card the device is connect to, or enter the IP to the
device.
If the device does not appear, press «F5» on your keyboard to reload the drop down lists.
4. Click on the green «Generate program» button to make your changes permanent.
Here, one sensor and one winch is added:
5 .1 CONNECTING HARDWARE
5 .1 .1 ADD SENSOR OR WINCH
13
13 35
av