Akuvox R63G, Руководство пользователя

Страница: 38 / 96

3.6.3 PPPOE Mode
1. In the LAN Port interface, press the Up or Down key on the phone keyboard to select PPPoE, then
Press the OK key on the phone keyboard or the Enter softkey to enter PPPoE Setting interface.
2. Press the Up or Down key on the phone keyboard to enter User Name, Password.
3. In according areas input User Name, Password.
3.6.4 Configure PC Port
1. In the Network Settings interface, press the Up or Down key on the phone keyboard to select PC
Port, press the OK key on the phone keyboard or the Enter softkey to enter PC Port configuration
interface;
2. In the PC Port configuration interface, press the Up or Down key on the phone keyboard to select
Bridge mode or Routing mode;
3. Configured Bridge mode, there will pop-up “Reboot Phone”
；
Press OK key to reboot;
（
PS
：
Setting will take effect after reboot
）
4. If cancel the reboot, the Settings will be saved but not take effect
；
5. Configured Routing mode, enter routing setting interface, input according value in the corresponding
position;
6. Press Save key after configuration, the phone will reboot.
3.6.5 Configure VLAN
In the Network Settings interface, press the Up or Down key on the phone keyboard
to select VLAN Port, press the OK key on the phone keyboard or the Enter softkey to
enter LAN Port configuration interface.
LAN Port
1. In the LAN Port interface, press the Up or Down key on the phone keyboard to select LAN Port,
press the OK key on the phone keyboard or the Enter softkey to enter LAN Port.
2. In the LAN Port interface, press the Up or Down key on the phone keyboard to configure the
functionality Enable, VID, Priority.
3. When the VID is empty
，
press the OK key on the phone keyboard or the Save softkey to save.