Akuvox R63G Скачать руководство пользователя страница 17

Страница: 17 / 96

2.6 Call Waiting

To configure Call Forward via Phone interface:

1. Press Menu -->Features-->Call Waiting-->Enter.

2. Use the Left or Right key to enable or disable call waiting status and tone.

3. Then press the Save key to save the changes.

2.7 Call Completion

To monitor the status of the other phone and send a prompt when the status

changing. For instant, if users make a call and the callee is unavailable to answer the

call, the feature will notify the user when the callee is available to receive the call.

This function only can be triggered when receiving 486 Busy message. Moreover, if

the phone enable the voice message, the function is also unavailable.

To configure Call completion via Phone interface.

1. Press Menu



Feature



Call Completion->Enter

2. Use the Left or Right key to enable or disable call completion.

3. Then press the Save key to save the changes.

Note

: Not all servers can support call completion.

Содержание R63G

































































































Результаты поиска

Содержание R63G

Отзывы:

Похожие инструкции для R63G

Бренды по названию

Популярные бренды

Akuvox R63G, Руководство пользователя

Результаты поиска

Содержание R63G

Отзывы:

Похожие инструкции для R63G

Бренды по названию

Популярные бренды